［ADA 06］ADAMS D.P.et al.，“Self－propagating，high－temperature combustion synthesis of rhombohedral AlPt thin films”，Journal of Materials Research，vol.21，no.12，pp.3168－3179，2006.
［ADA 15］ADAMS D.P.，“Reactive multilayers fabricated by vapor deposition：A critical review”，Thin Solid Films，vol.576，pp.98－128，2015.
［AND 13］ANDRE B.et al.，“High－energy ball milling to enhance the reactivity of aluminum nanopowders”，Materials Letters，vol.110，pp.108－110，2013.
［APP 06］APPERSON S.et al.，“On－chip initiation and burn rate measurements of thermite energetic reactions”，Multifunctional Energetic Mate⁃rials，vol.896，pp.81－86，2006.
［APP 07］APPERSON S.et al.，“Generation of fast propagating com⁃bustion and shock waves with copper oxide／aluminum nanothermite compos⁃ites”，Applied Physics Letters，vol.91，no.24，2007.
［APP 09］APPERSON S.et al.，“Characterization of nanothermite mate⁃rial for solid－fuel microthruster applications”，Journal of Propulsion and Power，vol.25，no.5，pp.1086－1091，2009.
［ARM 03a］ARMSTRONG R.W.et al.，“Enhanced propellant com⁃bustion with nanoparticles”，Nano Letters，vol.3，no.2，pp.253－255，2003.
［ARM 03b］ARMSTRONG R.W.，THADHANI N.，WILSON W.et al.（eds），“Synthesis，Characterization，and Properties of Energetic Reactive Materials”，Materials Research Society，2003.
［AUM 95］AUMANN C.E.，SKOFRONICK G.L.，Martin J.A.，“Oxi⁃dation behavior of aluminum nanopowders”，Journal of Vacuum Science＆Technology B，vol.13，no.3，pp.1178－1183，1995.
［BAC 13］BACCIOCHINI A.et al.，“Reactive structural materials con⁃solidated by cold spray：Al－CuO thermite”，Surface＆Coatings Technology，vol.226，pp.60－67，2013.
［BAD 08］BADGUJAR D.M.et al.，“Advances in science and technol⁃ogy of modern energetic materials：an overview”，Journal of Hazardous Materi⁃als，vol.151，nos.2－3，pp.289－305，2008.
［BAE 10］BAE J.H.et al.，“Crystallization of amorphous Si thin films by the reaction of MoO3／Al nanoengineered thermite”，Thin Solid Films，vol.518，no.22，pp.6205－6209，2010.
［BAH 14］BAHRAMI M.，TATON G.，CONÉDÉRA V.et al.，“Mag⁃netron sputtered Al－CuO nanolaminates：effect of stoichiometry and layers thickness on energy release and burning rate”，Propellants，Explosives，Pyro⁃technics，vol.39，no.3，pp.365－373，2014.
［BAR 96］BARBEE T.W.，WEIHS T.，Ignitable heterogeneous strati⁃fied structure for the propagation of an internal exothermic chemical reaction along an expanding wavefront and method of making the same，US Patent no.5538795，23 July 1996.
［BAR 97］BARMAK K.，MICHAELSEN C.，LUCADAMO G.，“Reac⁃tive phase formation in sputter－deposited Ni／Al multilayer thin films”，Jour⁃nal of Materials Research，vol.12，no.1，pp.133－146，1997.
［BAR 11］BARAS F.，POLITANO O.，“Molecular dynamics simula⁃tions of nanometric metallic multilayers：reactivity of the Ni－Al system”，Physical Review B，vol.84，no.2，2011.
［BAT 99］BATTEZZATI L.et al.，“Solid state reactions in Al Ni alter⁃nate foils induced by cold rolling and annealing”，Acta Materialia，vol.47，no.6，pp.1901－1914，1999.
［BAZ 06］BAZYN T.，KRIER H.，GLUMAC N.，“Combustion of nano⁃aluminum at elevated pressure and temperature behind reflected shock waves”，Combustion and Flame，vol.145，no.4，pp.703－713，2006.
［BAZ 07］BAZYN T.，KRIER H.，GLUMAC N.，“Evidence for the transition from the diffusion－limit in aluminum particle combustion”，Pro⁃ceedings of the Combustion Institute，vol.31，pp.2021－2028，2007.
［BEC 11］BECKER C.R.et al.，“Galvanic porous silicon composites for high－velocity nanoenergetics”，Nano Letters，vol.11，no.2，pp.803－807，2011.
［BEG 07］BEGLEY S.M.，BREWSTER M.Q.，“Radiative properties of MoO3 and Al nanopowders from light－scattering measurements”，Journal of Heat Transfer－Transactions of the ASME，vol.129，no.5，pp.624－633，2007.
［BEL 09］BELONI E.，DREIZIN E.L.，“Experimental study of ignition of magnesium powder by electrostatic discharge”，Combustion and Flame，vol.156，no.7，pp.1386－1395，2009.
［BEL 10］BELONI E.，DREIZIN E.L.，“Ignition of aluminum powders by electro－static discharge”，Combustion and Flame，vol.157，no.7，pp.1346－1355，2010.
［BEN 03］BENKA O.，STEINBATZ M.，“Oxidation of aluminum stu⁃died by secondary electron emission”，Surface Science，vol.525，nos.1－3，pp.207－214，2003.
［BES 02］BESNOIN E.et al.，“Effect of reactant and product melting on self－propagating reactions in multilayer foils”，Journal of Applied Phy⁃sics，vol.92，no.9，pp.5474－5481，2002.
［BLO 03］BLOBAUM K.J.et al.，“Al／Ni formation reactions：charac⁃terization of the metastable Al9Ni2 phase and analysis of its formation”，Acta Materialia，vol.51，no.13，pp.3871－3884，2003.
［BOC 05］BOCKMON B.S.et al.，“Combustion velocities and propaga⁃tion mechanisms of metastable interstitial composites”，Journal of Applied Physics，vol.98，no.6，2005.
［BOE 10］BOETTGE B.et al.，“Fabrication and characterization of re⁃active nanoscale multilayer systems for low－temperature bonding in microsys⁃tem technology”，Journal of Micromechanics and Microengineering，vol.20，no.6，pp.1－8，2010.
［BOI 02］BOIKO V.M.，POPLAVSKI S.V.，“Self－ignition and igni⁃tion of aluminum powders in shock waves”，Shock Waves，vol.11，no.4，pp.289－295，2002.
［BRA 12a］BRAEUER J.et al.，“A novel technique for MEMS packa⁃ging：reactive bonding with integrated material systems”，Sensors and Actua⁃tors A－Physical，vol.188，pp.212－219，2012.
［BRA 12b］BRAEUER J.et al.，“Integrated nano scale multilayer sys⁃tems for reactive bonding in microsystems technology”，Proceedings of the 4th Electronic System－Integration Technology Conference（ESTC），2012.
［BRA 12c］BRAEUER J.et al.，“Investigation of different nano scale energetic material systems for reactive wafer bonding”，Semiconductor Wafer Bonding 12：Science，Technology，and Applications，vol.50，no.7，pp.241－251，2012.
［BRE 08］BRECHIGNAC C.，HOUDY P.，LAHMANI M.，Nanomate⁃rials and Nanochemistry，Springer－Verlag，Berlin，Heidelberg，2008.
［BRO 95］BROOKS K.P.，BECKSTEAD M.W.，“Dynamics of alumi⁃num combustion”，Journal of Propulsion and Power，vol.11，no.4，pp.769－780，1995.
［BRU 92］BRUNE H.et al.，“Surface migration of hot adatoms in the course of dissociative chemisorption of oxygen on Al（111）”，Physical Review Letters，vol.68，no.5，pp.624－626，1992.
［BRU 93］BRUNE H.et al.，“Interaction of oxygen with Al（111）studied by scanning－tunneling－microscopy”，Journal of Chemical Physics，vol.99，no.3，pp.2128－2148，1993.
［CAM 99］CAMPBELL T.et al.，“Dynamics of oxidation of aluminum nanoclusters using variable charge molecular－dynamics simulations on paral⁃lel computers”，Physical Review Letters，vol.82，no.24，pp.4866－4869，1999.
［CHA 06］CHAMPION Y.，“Evaporation and condensation for metallic nanopowders”，Annales de Chimie－Science des Matériaux，vol.31，no.3，pp.281－294，2006.
［CHE 10］CHENG J.L.et al.，“Kinetic study of thermal－and impact－initiated reactions in Al－Fe2O3 nanothermite”，Combustion and Flame，vol.157，no.12，pp.2241－2249，2010.
［CHI 97a］CHIAVERINI M.J.，KUO K.K.，PERETZ A.et al.，“Heat flux and internal ballistic characterization of a hybrid rocket motor analog”，AIAA Paper 97－3080，July 1997.
［CHI 97b］CHIAVERINI M.J.，SERIN N.，JOHNSON D.K.et al.，“Instantaneous regression behavior or HTPB solid fuels burning with 60x in a simulated hybrid motor”，in KUO K.K.et al.（eds），Challenges in Propel⁃lants and Combustion：100 Years After Nobel，Begell House，New York，pp.719－733，1997.
［CHO 10］CHOWDHURY S.et al.，“Diffusive vs explosive reaction at the nanoscale”，Journal of Physical Chemistry C，vol.114，no.20，pp.9191－9195，2010.
［CHU 10a］CHURAMAN W.A.，CURRANO L.，BECKER C.，“Initia⁃tion and reaction tuning of nanoporous energetic silicon”，Journal of Physics and Chemistry of Solids，vol.71，no.2，pp.69－74，2010.
［CHU 10b］CHURAMAN W.A.et al.，“Optical initiation of nanopo⁃rous energetic silicon for safing and arming technologies”，Proceedings of the Optical Technologies for Arming，Safing，Fuzing，and FiringⅥ，vol.7795，2010.
［CHU 12］CHURAMAN W.A.et al.，“The first launch of an autono⁃mous thrust－driven microrobot using nanoporous energetic silicon”，Journal of Microelectromechanical Systems，vol.21，no.1，pp.198－205，2012.
［CIA 04］CIACCHI L.C.，PAYNE M.C.，“‘Hot－atom’O－2 disso⁃ciation and oxide nucleation on Al（111）”，Physical Review Letters，vol.92，no.17，2004.
［CLA 10］CLARK B.R.，PANTOYA M.L.，“The aluminium and io⁃dine pentoxide reaction for the destruction of spore forming bacteria”，Physical Chemistry Chemical Physics，vol.12，no.39，pp.12653－12657，2010.
［CLE 90］CLEVENGER L.A.，THOMPSON C.V.，TU K.N.，“Explo⁃sive silicidation in nickel amorphous－silicon multilayer thin－films”，Journal of Applied Physics，vol.67，no.6，pp.2894－2898，1990.
［COA 07］COACH：COMPUTER AIDED CHEMISTRY，Saint Martin d'Hères，France：Thermodata，available at：http：／／thermodata.online.fr／coachang.html，2007.
［CUR 09］CURRANO L.J.，CHURAMAN W.A.，“Energetic nanopo⁃rous silicon devices”，Journal of Microelectromechanical Systems，vol.18，no.4，pp.799－807，2009.
［DEA 13］DEAN S.W.et al.，“Energetic intermetallic materials formed by cold spray”，Intermetallics，vol.43，pp.121－130，2013.
［DIM 89］DIMITRIOU P.et al.，“Laser－induced ignition in solidstate combustion”，Aiche Journal，vol.35，no.7，pp.1085－1096，1989.
［DLO 06］DLOTT D.D.，“Thinking big（and small）about energetic materials”，Materials Science and Technology，vol.22，no.4，pp.463－473，2006.
［DOL 89］DOLINSKII Y.L.，YAVOROVSKII N.A.，“Effect of current on phase－transition in exploding wires”，Zhurnal Tekhnicheskoi Fiziki，vol.59，no.8，pp.169－171，1989.
［DRE 07］DREIZIN E.L.et al.，“Reactive nanocomposite materials produced by arrested reactive milling”，Theory and Practice of Energetic Mate⁃rials，vol.7，pp.3－14，2007.
［DRE 09］DREIZIN E.L.，“Metal－based reactive nanomaterials”，Progress in Energy and Combustion Science，vol.35，no.2，pp.141－167，2009.
［DUB 07］DUBOIS C.et al.，“Polymer－grafted metal nanoparticles for fuel applications”，Journal of Propulsion and Power，vol.23，no.4，pp.651－658，2007.
［DUC 04］DUCKHAM A.et al.，“Reactive nanostructured foil used as a heat source for joining titanium”，Journal of Applied Physics，vol.96，no.4，pp.2336－2342，2004.
［DUP 07］DU PLESSIS M.，“Properties of porous silicon nano－explo⁃sive devices”，Sensors and Actuators A－Physical，vol.135，no.2，pp.666－674，2007.
［DUP 11］DUPIANO P.，STAMATIS D.，DREIZIN E.L.，“Hydrogen production by reacting water with mechanically milled composite aluminummetal oxide powders”，International Journal of Hydrogen Energy，vol.36，no.8，pp.4781－4791，2011.
［DUT 09］DUTRO G.M.et al.，“The effect of stoichiometry on the combustion behavior of a nanoscale Al／MoO（3）thermite”，Proceedings of the Combustion Institute，vol.32，pp.1921－1928，2009.
［DYE 94］DYER T.S.，MUNIR Z.A.，RUTH V.，“The combustion synthesis of multilayer Nial systems”，Scripta Metallurgica et Materialia，vol.30，no.10，pp.1281－1286，1994.
［ECK 93］ECKERT J.et al.，“Melting behavior of nanocrystalline alu⁃minum powders”，Nanostructured Materials，vol.2，no.4，pp.407－413，1993.
［EDE 94］EDELSTEIN A.S.et al.，“Intermetallic phase－formation during annealing of Al／Ni multilayers”，Journal of Applied Physics，vol.76，no.12，pp.7850－7859，1994.
［EIS 04］EISENREICH N.et al.，“On the mechanism of low tempera⁃ture oxidation for aluminum particles down to the nano－scale”，Propellants Explosives Pyrotechnics，vol.29，no.3，pp.137－145，2004.
［ELL 03］ELLISON R.T.H.，MOSER M.，39th AIAA／ASME／SAE／AS⁃EE Joint Propulsion Conference and Exhibit，Huntville，AL，AIAA 2003－4498，2003.
［FAD 10］FADENBERGER K.et al.，“In situ observation of rapid re⁃actions in nanoscale Ni－Al multilayer foils using synchrotron radiation”，Ap⁃plied Physics Letters，vol.97，no.14，2010.
［FAN 07］FAN M.Q.，XU F.，SUN L.X.，“Studies on hydrogen gener⁃ation characteristics of hydrolysis of the ball milling Al－based materials in pure water”，International Journal of Hydrogen Energy，vol.32，no.14，pp.2809－2815，2007.
［FED 03］FEDOROV A.V.，KHARLAMOVA Y.V.，“Ignition of an a⁃luminum particle”，Combustion Explosion and Shock Waves，vol.39，no.5，pp.544－547，2003.
［FIS 98］FISCHER S.H.，GRUBELICH M.C.，“Theoretical energy re⁃lease of thermites，intermetallics，combustible metals”，Proceedings of the 24th International Pyrotechnics Seminar，Monterey，CA，pp.1－6，July 1998.
［FOL 05］FOLEY T.，JOHNSON C.E.，HIGA K.T.，“Inhibition of ox⁃ide formation on aluminum nanoparticles by transition metal coating”，Chemis⁃try of Materials，vol.17，no.16，pp.4086－4091，2005.
［FOL 07］FOLEY T.et al.，“Development of nanothermite composites with variable electrostatic discharge ignition thresholds”，Propellants Explo⁃sives Pyrotechnics，vol.32，no.6，pp.431－434，2007.
［GAC 05］GACHON J.C.et al.，“On the mechanism of heterogeneous reaction and phase formation in Ti／Al multilayer nanofilms”，Acta Materialia，vol.53，no.4，pp.1225－1231，2005.
［GAN 11］GANGOPADHYAY S.，GANGOPADHYAY K.，BEZMELNITSYN A.et al.，Shock wave and power generation using on－chip nanoenergetic material，US Patent no.8066831，2011.
［GAO 07］GAO Y.，Method for preparing nanoscale nickel－coated alu⁃minum powder，Chinese Patent no.101041180 A 20070926，2007.
［GAS 01a］GASH A.E.et al.，“New sol－gel synthetic route to transi⁃tion and main－group metal oxide aerogels using inorganic salt precursors”，Journal of Non－Crystalline Solids，vol.285，nos.1－3，pp.22－28，2001.
［GAS 01b］GASH A.E.et al.，“Use of epoxides in the sol－gel syn⁃thesis of porous iron（III）oxide monoliths from Fe（III）salts”，Chemistry of Materials，vol.13，no.3，pp.999－1007，2001.
［GAV 00］GAVENS A.J.et al.，“Effect of intermixing on self－propa⁃gating exothermic reactions in Al／Ni nanolaminate foils”，Journal of Applied Physics，vol.87，no.3，pp.1255－1263，2000.
［GLA 64］GLASSMAN I.，BRZUSTOWSKI T.A.，Spectroscopic Inves⁃tigation of Metal Combustion，Heterogeneous Combustion，Astronautics and Aeronautics Series Academic Press，New York，vol.15，pp.41－73，1964.
［GRA 76］GRANQVIST C.G.，BUHRMAN R.A.，“Ultrafine metal particles”，Journal of Applied Physics，vol.47，no.5，pp.2200－2219，1976.
［GRA 04］GRANIER J.J.，PANTOYA M.L.，“Laser ignition of nano⁃composite thermites”，Combustion and Flame，vol.138，no.4，pp.373－383，2004.
［GRI 12］GRINSHPUN S.A.et al.，“Inactivation of aerosolized bacil⁃lus atrophaeus（BG）endospores and MS2 viruses by combustion of reactive materials”，Environmental Science＆Technology，vol.46，no.13，pp.7334－7341，2012.
［GRO 06a］GROMOV A.A.，FORTER－BARTH U.，TEIPEL U.，“Aluminum nanopowders produced by electrical explosion of wires and passi⁃vated by non－inert coatings：characterisation and reactivity with air and wa⁃ter”，Powder Technology，vol.164，no.2，pp.111－115，2006.
［GRO 06b］GROMOV A.et al.，“Characterization of aluminum pow⁃ders：II.Aluminum nanopowders passivated by non－inert coatings”，Propel⁃lants Explosives Pyrotechnics，vol.31，no.5，pp.401－409，2006.
［HAD 10a］HADJIAFXENTI A.et al.，“Synthesis of reactive Al／Ni structures by ball milling”，Intermetallics，vol.18，no.11，pp.2219－2223，2010.
［HAD 10b］HADJIAFXENTI A.et al.，“The influence of structure on thermal behavior of reactive Al－Ni powder mixtures formed by ball milling”，Journal of Alloys and Compounds，vol.505，no.2，pp.467－471，2010.
［HEB 04］HEBERT R.J.，PEREPEZKO J.H.，“Deformation－induced synthesis and structural transformations of metallic multilayers”，Scripta Mate⁃rialia，vol.50，no.6，pp.807－812，2004.
［HEM 13］HEMERYCK A.et al.，“Bottom－up modeling of Al／Ni multilayer combustion：effect of intermixing and role of vacancy defects on the ignition process”，Journal of Applied Physics，vol.113，no.20，2013.
［HG 84］HG B.，“Modern Methods of Particle Size Analysis”，Chemical Analysis，vol.73，Wiley，New York，1984.
［HIG 01］HIGA K.T，Johnson C.，HOLLINS R.A.，Preparation of fine aluminum powders by solution methods，US Patent 6，179，899，2001.
［HOF 06］HOFMANN A.，LAUCHT H.，KOVALEV D.et al.，Explo⁃sive composition and its use，US Patent no.20，050，072，502 A1，2006.
［HOS 07］HOSSAIN M.et al.，“Crystallization of amorphous silicon by self－propagation of nanoengineered thermites”，Journal of Applied Physics，vol.101，no.5，2007.
［HUA 07］HUANG Y.et al.，“Combustion of bimodal nano／micronsized aluminum particle dust in air”，Proceedings of the Combustion Institute，vol.31，pp.2001－2009，2007.
［HUA 09］HUANG Y.et al.，“Effect of particle size on combustion of aluminum particle dust in air”，Combustion and Flame，vol.156，no.1，pp.5－13，2009.
［HUN 04］HUNT E.M.，PLANTIER K.B.，PANTOYA M.L.，“Nanoscale reactants in the self－propagating high－temperature synthesis of nickel aluminide”，Acta Materialia，vol.52，no.11，pp.3183－3191，2004.
［ING 04］INGENITO A.，BRUNO C.，“Using aluminum for space pro⁃pulsion”，Journal of Propulsion and Power，vol.20，no.6，pp.1056－1063，2004.
［IVA 94］IVANOV V.G.et al.，“Combustion of mixtures of ultradis⁃perse aluminum and gel－like water”，Combustion Explosion and Shock Waves，vol.30，no.4，pp.569－570，1994.
［IVA 00］IVANOV V.G.et al.，“Specific features of the reaction be⁃tween ultrafine aluminum and water in a combustion regime”，Combustion Ex⁃plosion and Shock Waves，vol.36，no.2，pp.213－219，2000.
［IVA 03］IVANOV Y.F.et al.，“Productions of ultra－fine powders and their use in high energetic compositions”，Propellants Explosives Pyrotech⁃nics，vol.28，no.6，pp.319－333，2003.
［JAC 95］JACOBSEN J.et al.，“Electronic－structure，total energies，and STM images of clean and oxygen－covered Al（111）”，Physical Review B，vol.52，no.20，pp.14954－14962，1995.
［JAY 98a］JAYARAMAN S.et al.，“Modeling self－propagating exo⁃thermic reactions in multilayer systems”，Phase Transformations and Systems Driven Far from Equilibrium，vol.481，pp.563－568，1998.
［JAY 98b］JAYARAMAN S.et al.，“A numerical study of unsteady self－propagating reactions in multilayer foils”，Proceedings of the 27th Sym⁃posium（International）on Combustion，vol.1－2，pp.2459－2467，1998.
［JAY 99］JAYARAMAN S.et al.，“Numerical predictions of oscillatory combustion in reactive multilayers”，Journal of Applied Physics，vol.86，no.2，pp.800－809，1999.
［JIA 98］JIANG W.H.，YATSUI K.，“Pulsed wire discharge for nanos⁃ize powder synthesis”，IEEE Transactions on Plasma Science，vol.26，no.5，pp.1498－1501，1998.
［JOH 07］JOHNSON C.E.et al.，“Characterization of nanometer－to micron－sized aluminum powders：size distribution from thermogravimetric a⁃nalysis”，Journal of Propulsion and Power，vol.23，no.4，pp.669－682，2007.
［JON 00］JONES D.E.G.et al.，“Thermal characterization of passiva⁃ted nanometer size aluminium powders”，Journal of Thermal Analysis and Cal⁃orimetry，vol.61，no.3，pp.805－818，2000.
［JON 03］JONES D.E.G.et al.，“Hazard characterization of aluminum nanopowder compositions”，Propellants Explosives Pyrotechnics，vol.28，no.3，pp.120－131，2003.
［JOU 05a］JOUET R.J.，WARREN A.D.，MANNION J.D.，“Prepara⁃tion and passivation of aluminum nanoparticles for energetics applications”，Abstracts of Papers of the American Chemical Society，vol.230，pp.U2250－U2251，2005.
［JOU 05b］JOUET R.J.et al.，“Surface passivation of bare aluminum nanoparticles using perfluoroalkyl carboxylic acids”，Chemistry of Materials，vol.17，no.11，pp.2987－2996，2005.
［JOU 06］JOUET R.J.et al.，“Preparation and reactivity analysis of novel perfluoroalkyl coated aluminium nanocomposites”，Materials Science and Technology，vol.22，no.4，pp.422－429，2006.
［KAP 12］KAPPAGANTULA K.S.et al.，“Tuning energetic material reactivity using surface functionalization of aluminum fuels”，Journal of Physi⁃cal Chemistry C，vol.116，no.46，pp.24469－24475，2012.
［KIE 01］KIEJNA A.，LUNDQVIST B.I.，“First－principles study of surface and subsurface O structures at Al（111）”，Physical Review B，vol.63，no.8，2001.
［KIE 02］KIEJNA A.，LUNDQVIST B.I.，“Stability of oxygen adsorp⁃tion sites and ultrathin aluminum oxide films on Al（111）”，Surface Science，vol.504，nos.1－3，pp.1－10，2002.
［KIM 04］KIM S.H.，ZACHARIAH M.R.，“Enhancing the rate of energy release from nanoenergetic materials by electrostatically enhanced as⁃sembly”，Advanced Materials，vol.16，no.20，pp.1821－1825，2004.
［KIM 06］KIM H.Y.，CHUNG D.S.，HONG S.H.，“Intermixing crite⁃ria for reaction synthesis of Ni／Al multilayered microfolls”，Scripta Materia⁃lia，vol.54，no.9，pp.1715－1719，2006.
［KIM 11］KIM J.S.et al.，“Direct characterization of phase transfor⁃mations and morphologies in moving reaction zones in Al／Ni nanolaminates using dynamic transmission electron microscopy”，Acta Materialia，vol.59，no.9，pp.3571－3580，2011.
［KLE 05］KLEINER K.，Metal：fuels of the future，available at：www.mng.org.uk／gh／renewable_energy／metal_NS_article.htm，2005.
［KNE 09］KNEPPER R.et al.，“Effect of varying bilayer spacing distri⁃bution on reaction heat and velocity in reactive Al／Ni multilayers”，Journal of Applied Physics，vol.105，no.8，2009.
［KOK 09］KOKONOU M.et al.，“Reactive bimetallic Al／Ni nanostruc⁃tures for nanoscale heating applications fabricated using a porous alumina tem⁃plate”，Microelectronic Engineering，vol.86，nos.4－6，pp.836－839，2009.
［KOR 12］KORAMPALLY M.et al.，“Transient pressure mediated in⁃tranuclear delivery of FITC－Dextran into chicken cardiomyocytes by MEMSbased nanothermite reaction actuator”，Sensors and Actuators B：Chemical，vol.171，pp.1292－1296，2012.
［KOV 01］KOVALEV D.et al.，“Strong explosive interaction of hydro⁃genated porous silicon with oxygen at cryogenic temperatures”，Physical Re⁃view Letters，vol.87，no.6，2001.
［KUB 62］KUBASCHEWSKI O.，HOPKINS B.E.，Oxidation of Metals and Alloys，Butterworths＆Co.，London，pp.319，1962.
［KUO 93］KUO K.K.et al.，“Preignition dynamics of Rdx－based en⁃ergetic materials under CO2－laser heating”，Combustion and Flame，vol.95，no.4，pp.351－361，1993.
［KWO 01］KWON Y.S.et al.，“Ultra－fine powder by wire explosion method”，Scripta Materialia，vol.44，nos.8－9，pp.2247－2251，2001.
［KWO 03a］KWON Y.S.et al.，“Passivation process for superfine alu⁃minum powders obtained by electrical explosion of wires”，Applied Surface Sci⁃ence，vol.211，nos.1－4，pp.57－67，2003.
［KWO 03b］KWON Y.S.et al.，“The mechanism of combustion of su⁃perfine aluminum powders”，Combustion and Flame，vol.133，no.4，pp.385－391，2003.
［KWO 05］KWON Y.S.，ILYIN A.P.，NAZARENKO O.B.，“Electric explosion of wires in multicomponent reactionary liquid ambiences as method for producing nanopowder of complex composition”，Proceedings of Korus 2005，pp.211－213，2005.
［KWO 13］KWON J.et al.，“Interfacial chemistry in Al／CuO reactive nanomaterial and its role in exothermic reaction”，ACS Applied Materials＆In⁃terfaces，vol.5，no.3，pp.605－613，2013.
［LAN 12］LANTHONY C.et al.，“On the early stage of aluminum oxi⁃dation：an extraction mechanism via oxygen cooperation”，Journal of Chemical Physics，vol.137，no.9，2012.
［LAN 14］LANTHONY C.et al.，“Elementary surface chemistry during CuO／Al nanolaminate－thermite synthesis：copper and oxygen deposition on aluminum（111）surfaces”，ACS Applied Materials＆Interfaces，vol.6，no.17，pp.15086－15097，2014.
［LAR 03］LARANGOT B.et al.，“Solid propellant micro thrusters for space application”，Houille Blanche－Revue Internationale De L’Eau，vol.5，pp.111－115，2003.
［LAW 73］LAW C.K.，WILLIAMS F.A.，“Combustion of magnesium particles in oxygen－inert atmosphere”，Combustion Science and Technology，vol.7，no.5，pp.197－212，1973.
［LEE 09］LEE C.H.et al.，“Crystallization of amorphous silicon thin films using nanoenergetic intermolecular materials with buffer layers”，Journal of Crystal Growth，vol.311，no.4，pp.1025－1031，2009.
［LEG 01］LEGRAND B.et al.，“Ignition and combustion of levitated magnesium and aluminum particles in carbon dioxide”，Combustion Science and Technology，vol.165，pp.151－174，2001.
［LEV 99］LEVENSPIEL O.，“Chemical reaction engineering”，Industri⁃al＆Engineering Chemistry Research，vol.38，no.11，pp.4140－4143，1999.
［LEV 07］LEVITAS V.I.et al.，“Mechanochemical mechanism for fast reaction of metastable intermolecular composites based on dispersion of liquid metal”，Journal of Applied Physics，vol.101，no.8，2007.
［LID 91］LIDE D.R.，Handbook of Chemistry and Physics，71st ed.，CRC Press，Boca Raton，Florida，1991.
［MA 90］MA E.et al.，“Self－propagating explosive reactions in Al／Ni multilayer thin－films”，Applied Physics Letters，vol.57，no.12，pp.1262－1264，1990.
［MAL 08］MALCHI J.Y.et al.，“The effect of added Al（2）O（3）on the propagation behavior of an Al／CuO nanoscale thermite”，Combustion Sci⁃ence and Technology，vol.80，no.7，pp.1278－1294，2008.
［MAL 09］MALCHI J.Y.，FOLEY T.J.，YETTER R.A.，“Electrostati⁃cally self－assembled nanocomposite reactive microspheres”，ACS Applied Ma⁃terials＆Interfaces，vol.1，no.11，pp.2420－2423，2009.
［MAN 97］MANN A.B.et al.，“Modeling and characterizing the propa⁃gation velocity of exothermic reactions in multilayer foils”，Journal of Applied Physics，vol.82，no.3，pp.1178－1188，1997.
［MAN 10］MANESH N.A.，BASU S.，KUMAR R.，“Experimental flame speed in multi－layered nano－energetic materials”，Combustion and Flame，vol.157，no.3，pp.476－480，2010.
［MAR 06］MARIOTH E.，KROEBER H.，LOEBBECKE S.et al.，“Comparison of nanoparticulate thermite mixtures formed by conventional and supercritical fluid processes“，Proceedings of the 37th International Annual Conference of ICT（Energetic Materials），Fraunhofer－Institut fur Chemische Technologie，Karlruhe，2006.
［MAR 11］MARTIROSYAN K.S.，“Nanoenergetic gas－generators：principles and applications”，Journal of Materials Chemistry，vol.21，no.26，pp.9400－9405，2011.(www.xing528.com)
［MCC 92］MCCORD P.，YAU S.L.，BARD A.J.，“Chemilumines⁃cence of anodized and etched silicon－evidence for a luminescent siloxenelike layer on porous silicon”，Science，vol.257，no.5066，pp.68－69，1992.
［MCD 10］MCDONALD J.P.et al.，“Rare－earth transition－metal intermetallic compounds produced via self－propagating，high－temperature synthesis”，Journal of Materials Research，vol.25，no.4，pp.718－727，2010.
［MEN 98a］MENCH M.M.，YEH C.L.，KUO K.K.，“Propellant burn⁃ing rate enhancement and thermal behavior of ultra－fine aluminum powders（Alex）”，Proceedings of the 29th International Annual Conference of ICT，Karlsruhe，Germany，p.30／1，30 June－3 July 1998.
［MEN 98b］MENCH M.M.et al.，“Comparison of thermal behavior of regular and ultra－fine aluminum powders（Alex）made from plasma explo⁃sion process”，Combustion Science and Technology，vol.135，nos.1－6，pp.269－292，1998.
［MEN 04］MENON L.et al.，“Ignition studies of Al／Fe2O3 energetic nanocomposites”，Applied Physics Letters，vol.84，no.23，pp.4735－4737，2004.
［MIK 02］MIKULEC F.V.，KIRTLAND J.D.，SAILOR M.J.，“Explo⁃sive nanocrystalline porous silicon and its use in atomic emission spectrosco⁃py”，Advanced Materials，vol.14，no.1，pp.38－41，2002.
［MOO 04］MOORE D.S.，SON S.E.，ASAY B.W.，“Time－resolved spectral emission of deflagrating nano－Al and nano－MoO（3）metastable in⁃terstitial composites”，Propellants Explosives Pyrotechnics，vol.29，no.2，pp.106－111，2004.
［MOO 07］MOORE K.，PANTOYA M.L.，SON S.F.，“Combustion be⁃haviors resulting from bimodal aluminum size distributions in thermites”，Jour⁃nal of Propulsion and Power，vol.23，no.1，pp.181－185，2007.
［MOR 01］MORDOSKY J.W.et al.，“Utilization of nano－sized alumi⁃num particles in RP－1 gel propellants for spray combustion in a rocket engine”，Abstracts of Papers of the American Chemical Society，vol.221，pp.U609－U609，2001.
［MOR 10］MORRIS C.J.et al.，“Rapid initiation of reactions in Al／Ni multilayers with nanoscale layering”，Journal of Physics and Chemistry of Solids，vol.71，no.2，pp.84－89，2010.
［MOR 11］MORRIS C.J.et al.，“Streak spectrograph temperature analysis from electrically exploded Ni／Al nanolaminates”，Thin Solid Films，vol.520，no.5，pp.1645－1650，2011.
［MOR 12］MORRIS C.J.et al.，“Initiation of nanoporous energetic sil⁃icon by optically－triggered，residual stress powered microactuators”，Pro⁃ceedings of the IEEE 25th International Conference on Micro Electro Mechani⁃cal Systems（MEMS），2012.
［MOR 13］MORRIS C.J.，WILKINS P.R.，MAY C.M.，“Streak spec⁃troscopy and velocimetry of electrically exploded Ni／Al laminates”，Journal of Applied Physics，vol.113，no.4，2013.
［MOT 12］MOTLAGH E.B.，KHAKI J.V.，SABZEVAR M.H.，“Welding of aluminum alloys through thermite like reactions in Al－CuO－Ni system”，Materials Chemistry and Physics，vol.133，nos.2－3，pp.757－763，2012.
［NAK 98］NAKAGAWA Y.et al.，“Synthesis of TiO2 and TiN nanosize powders by intense light ion－beam evaporation”，Journal of Materials Sci⁃ence，vol.33，no.2，pp.529－533，1998.
［NEL 13］NELLUMS R.R.et al.，“Effect of solids loading on resonant mixed Al－Bi2O3 nanothermite powders”，Propellants Explosives Pyrotechnics，vol.38，no.5，pp.605－610，2013.
［OHK 11］OHKURA Y.et al.，“Synthesis and ignition of energetic CuO／Al core／shell nanowires”，Proceedings of the Combustion Institute，vol.33，pp.1909－1915，2011.
［PAL 96］PALASZEWSKI B.，ZAKINI J.，“Metallized gelled pellants：oxygen／RP－1／aluminum rocket heat transfer and combustion experiment”，32nd AIAA／ASME／SAE／ASEE Joint Propulsion Conference，AIAA－96－2622，NASA TM－107309，Lake Buena Vista，FL，July 1996.
［PAL 98］PALASZEWSKI B.，IANOVSKI L.S.，CARRICK P.，“Pro⁃pellant technologies：far－reaching benefits for aeronautical and space－vehi⁃cle propulsion”，Journal of Propulsion and Power，vol.14，no.5，pp.641－648，1998.
［PAL 04］PALASZEWSKI B.，J.J.，BREISACHER K.et al.，40th AIAA／ASME／SAE／ASEE Joint Propulsion Conference，AIAA－2004－4191，2004.
［PAN 05］PANTOYA M.L.，GRANIER J.J.，“Combustion behavior of highly energetic thermites：nano versus micron composites”，Propellants Ex⁃plosives Pyrotechnics，vol.30，no.1，pp.53－62，2005.
［PAN 09a］PANTOYA M.L.，DEAN S.W.，“The influence of alumina passivation on nano－Al／Teflon reactions”，Thermochimica Acta，vol.493，nos.1－2，pp.109－110，2009.
［PAN 09b］PANTOYA M.L.，HUNT E.M.，“Nanochargers：energetic materials for energy storage”，Applied Physics Letters，vol.95，no.25，2009.
［PAR 05］PARK K.et al.，“Size－resolved kinetic measurements of aluminum nanoparticle oxidation with single particle mass spectrometry”，Journal of Physical Chemistry B，vol.109，no.15，pp.7290－7299，2005.
［PAR 06］PARK K.，RAI A.，ZACHARIAH M.R.，“Characterizing the coating and size－resolved oxidative stability of carbon－coated aluminum nanoparticles by single－particle mass－spectrometry”，Journal of Nanoparti⁃cle Research，vol.8，nos.3－4，pp.455－464，2006.
［PAT 12］PATRO L.N.，HARIHARAN K.，“Mechanical milling：an alternative approach for enhancing the conductivity of SnF2”，Materials Let⁃ters，vol.80，pp.26－28，2012.
［PEC 85］PECORA R.（ed.），Dynamic light Scattering：Applications of Photon Correlation Spectroscopy，Plenum Press，New York，1985.
［PER 07a］PERRY W.L.et al.，“Energy release characteristics of the nanoscale aluminum－tungsten oxide hydrate metastable intermolecular com⁃posite”，Journal of Applied Physics，vol.101，no.6，2007.
［PER 07b］PERUT C.，GOLFIECE M.，“New solid propellants”，Pro⁃ceedings of the 7th International Symposium on Special Topics in Chemical Pro⁃pulsion，Kyoto，Japan，17－21 September 2007.
［PET 10a］PETRANTONI M.et al.，“Synthesis process of nanowired Al／CuO thermite”，Journal of Physics and Chemistry of Solids，vol.71，no.2，pp.80－83，2010.
［PET 10b］PETRANTONI M.et al.，“Multilayered Al／CuO thermite formation by reactive magnetron sputtering：nano versus micro”，Journal of Applied Physics，vol.108，no.8，2010.
［PIV 04］PIVKINA A.et al.，“Nanomaterials for heterogeneous com⁃bustion”，Propellants Explosives Pyrotechnics，vol.29，no.1，pp.39－48，2004.
［PIV 06］PIVKINA A.et al.，“Plasma synthesized nano－aluminum powders－structure，thermal properties and combustion behavior”，Journal of Thermal Analysis and Calorimetry，vol.86，no.3，pp.733－738，2006.
［PLA 05］PLANTIER K.B.，PANTOYA M.L.，GASH A.E.，“Com⁃bustion wave speeds of nanocomposite Al／Fe2O3：the effects of Fe2O3 particle synthesis technique”，Combustion and Flame，vol.140，no.4，pp.299－309，2005.
［PRA 05］PRAKASH A.，MCCORMICK A.V.，ZACHARIAH M.R.，“Tuning the reactivity of energetic nanoparticles by creation of a core－shell nanostructure”，Nano Letters，vol.5，no.7，pp.1357－1360，2005.
［PRE 05］PRENTICE D.，PANTOYA M.L.，CLAPSADDLE B.J.，“Effect of nanocomposite synthesis on the combustion performance of a ternary thermite”，Journal of Physical Chemistry B，vol.109，no.43，pp.20180－20185，2005.
［PUS 06］PUSZYNSKI J.A.，BULIAN C.J.，SWIATKIEWICZ J.J.，“The effect of nanopowder attributes on reaction mechanism and ignition sen⁃sitivity of nanothermites”，Multifunctional Energetic Materials，vol.896，pp.147－158，2006.
［PUS 07］PUSZYNSKI J.A.，BULIAN C.J.，SWIATKIEWICZ J.J.，“Processing and ignition characteristics of aluminum－bismuth trioxide nano⁃thermite system”，Journal of Propulsion and Power，vol.23，no.4，pp.698－706，2007.
［QIU 07］QIU X.，WANG J.，“Experimental evidence of two－stage formation of Al3Ni in reactive Ni／Al multilayer foils”，Scripta Materialia，vol.56，no.12，pp.1055－1058，2007.
［QIU 08］QIU X.，WANG J.，“Bonding silicon wafers with reactive multilayer foils”，Sensors and Actuators A－Physical，vol.141，no.2，pp.476－481，2008.
［QIU 12］QIU X.，et al.，“A micro initiator realized by reactive Ni／Al nanolaminates”，Journal of Materials Science－Materials in Electronics，vol.23，no.12，pp.2140－2144，2012.
［RAB 07］RABINOVICH O.S.et al.，“Conditions for combustion syn⁃thesis in nanosized Ni／Al films on a substrate”，Physica B：Condensed Mat⁃ter，vol.392，nos.1－2，pp.272－280，2007.
［RAI 04］RAI A.et al.，“Importance of phase change of aluminum in oxidation of aluminum nanoparticles”，Journal of Physical Chemistry B，vol.108，no.39，pp.14793－14795，2004.
［RAI 06］RAI A.et al.，“Understanding the mechanism of aluminium nanoparticle oxidation”，Combustion Theory and Modelling，vol.10，no.5，pp.843－859，2006.
［RAM 05］RAMASWAMY A.L.，KASTE P.，“A‘nanovision’of the physiochemical phenomena occurring in nanoparticles of aluminum”，Journal of Energetic Materials，vol.23，no.1，pp.1－25，2005.
［REE 12］REESE D.A.，SON S.F.，GROVEN L.J.，“Preparation and characterization of energetic crystals with nanoparticle inclusions”，Propellants Explosives Pyrotechnics，vol.37，no.6，pp.635－638，2012.
［REI 99］REISS M.E.et al.，“Self－propagating formation reactions in Nb／Si multilayers”，Materials Science and Engineering A－Structural Materials Properties Microstructure and Processing，vol.261，nos.1－2，pp.217－222，1999.
［RIS 03a］RISHA G.A.，EVANS B.J.，BOYER E.et al.（eds），“Nanosized aluminum and boron－based solid fuel characterization in hybrid rocket engine”，Paper AIAA 2003－4593 39th AIAA／ASME／SAE／ASEE Joint Propulsion Conference and Exhibit，Huntsville，Alabama，23 July 2003.
［RIS 03b］RISHA G.A.，EVANS B.J.，BOYER E.et al.，Proceedings of the 39th AIAA／ASME／SAE／ASEE Joint Propulsion Conference and Exhibit，Huntsville，Alabama，AIAA 2003－4593，20－23 July 2003.
［RIS 07］RISHA G.A.et al.，“Combustion of nano－aluminum and liquid water”，Proceedings of the Combustion Institute，vol.31，pp.2029－2036，2007.
［ROD 09］RODRIGUEZ G.A.A.et al.，“A microactuator based on the decomposition of an energetic material for disposable lab－on－chip applica⁃tions：fabrication and test”，Journal of Micromechanics and Microengineering，vol.19，no.1，2009.
［ROG 08］ROGACHEV A.S.，“Exothermic reaction waves in multilay⁃er nanofilms”，Uspekhi Khimii，vol.77，no.1，pp.22－38，2008.
［ROG 10］ROGACHEV A.S.，MUKASYAN A.S.，“Combustion of het⁃erogeneous nanostructural systems（review）”，Combustion Explosion and Shock Waves，vol.46，no.3，pp.243－266，2010.
［ROS 98a］ROSSI C.，TEMPLE－BOYER P.，ESTEVE D.，“Realiza⁃tion and performance of thin SiO2／SiNx membrane for microheater applica⁃tions”，Sensors and Actuators A－Physical，vol.64，no.3，pp.241－245，1998.
［ROS 98b］ROSSI C.et al.，“Realization，characterization of micro py⁃rotechnic actuators and FEM modelling of the combustion ignition”，Sensors and Actuators A－Physical，vol.70，nos.1－2，pp.141－147，1998.
［ROS 99］ROSSI C.，ESTEVE D.，MINGUES C.，“Pyrotechnic actua⁃tor：a new generation of Si integrated actuator”，Sensors and Actuators APhysical，vol.74，nos.1－3，pp.211－215，1999.
［ROS 02］ROSSI C.et al.，“Design，fabrication and modeling of solid propellant microrocket－application to micropropulsion”，Sensors and Actua⁃tors A－Physical，vol.99，nos.1－2，pp.125－133，2002.
［ROS 07］ROSSI C.et al.，“Nanoenergetic materials for MEMS：a re⁃view”，Journal of Microelectromechanical Systems，vol.16，no.4，pp.919－931，2007.
［ROS 08］ROSSI C.，“Nano matériauxénergétiques：perspectives d’intégration dans les microsystèmes”，Nanotechnologies，Revue des Techniques de l’ingénieur，vol.5050，p.21，10 April 2008.
［ROS 10］ROSSI C.，ESTEVE A.，VASHISHTA P.，“Nanoscale ener⁃getic materials”，Journal of Physics and Chemistry of Solids，vol.71，no.2，pp.57－58，2010.
［ROS 14］ROSSI C.，“Two decades of research on nano－energetic ma⁃terials”，Propellants Explosives Pyrotechnics，vol.39，no.3，pp.323－327，June 2014.
［ROZ 92］ROZENBAND V.I.，VAGANOVA N.I.，“A strength model of heterogeneous ignition of metal particles”，Combustion and Flame，vol.88，no.1，pp.113－118，1992.
［RUB 02］RUBERTO C.，YOURDSHAHYAN Y.，LUNDQVIST B.I.，“Stability of a flexible polar ionic crystal surface：metastable alumina and one－dimensional surface metallicity”，Physical Review Letters，vol.88，no.22，2002.
［RUF 07］RUFINO B.et al.，“Influence of particles size on thermal properties of aluminium powder”，Acta Materialia，vol.55，no.8，pp.2815－2827，2007.
［SAL 10a］SALLOUM M.，KNIO O.M.，“Simulation of reactive nano⁃laminates using reduced models：III.Ingredients for a general multidimen⁃sional formulation”，Combustion and Flame，vol.157，no.6，pp.1154－1166，2010.
［SAL 10b］SALLOUM M.，KNIO O.M.，“Simulation of reactive nano⁃laminates using reduced models：II.Normal propagation”，Combustion and Flame，vol.157，no.3，pp.436－445，2010.
［SAL 10c］SALLOUM M.，KNIO O.M.，“Simulation of reactive nano⁃laminates using reduced models：I.Basic formulation”，Combustion and Flame，vol.157，no.2，pp.288－295，2010.
［SAN 07］SANDERS V.E.et al.，“Reaction propagation of four nanoscale energetic composites（Al／MoO3，Al／WO3，Al／CuO，and Bi2O3）”，Journal of Propulsion and Power，vol.23，no.4，pp.707－714，2007.
［SAR 07］SARATHI R.，SINDHU T.K.，CHAKRAVARTHY S.R.，“Generation of nano aluminium powder through wire explosion process and its characterization”，Materials Characterization，vol.58，no.2，pp.148－155，2007.
［SCH 05］SCHOENITZ M.，WARD T.S.，DREIZIN E.L.，“Fully dense nano－composite energetic powders prepared by arrested reactive mill⁃ing”，Proceedings of the Combustion Institute，vol.30，pp.2071－2078，2005.
［SCH 06］SCHEFFLAN R.et al.，“Formation of aluminum nanoparti⁃cles upon condensation from vapor phase for energetic applications”，Journal of Energetic Materials，vol.24，no.2，pp.141－156，2006.
［SED 08］SEDOI V.S.，IVANOV Y.F.，“Particles and crystallites un⁃der electrical explosion of wires”，Nanotechnology，vol.19，no.14，2008.
［SEV 12］SEVERAC F.et al.，“High－energy Al／CuO nanocomposites obtained by DNA－directed assembly”，Advanced Functional Materials，vol.22，no.2，pp.323－329，2012.
［SHA 06］SHAFIROVICH E.，DIAKOV V.，VARMA A.，“Combustion of novel chemical mixtures for hydrogen generation”，Combustion and Flame，vol.144，nos.1－2，pp.415－418，2006.
［SIE 01］SIEBER H.et al.，“Structural evolution and phase formation in cold－rolled aluminum－nickel multilayers”，Acta Materialia，vol.49，no.7，pp.1139－1151，2001.
［SIM 97］SIMPSON R.L.et al.，“CL－20 performance exceeds that of HMX and its sensitivity is moderate”，Propellants Explosives Pyrotechnics，vol.22，no.5，pp.249－255，1997.
［SIM 99］SIMONENKO V.N.，ZARKO V.E.，“Comparative studying of the combustion behavior of composite propellant containing ultrafine alumi⁃num”，Proceedings of the 30th International Annual Conference of ICT，Karlsruhe，Germany，p.21，29 June－2 July 1999.
［SIP 08］SIPPEL T.R.，SON S.F.，RISHA G.A.et al.，“Combustion and characterization of nanoscale aluminum and ice propellants”，Proceedings of the 44th AIAA／ASME／SAE／ASEE Joint Propulsion Conference and Exhibit（AIAA 2008），vol.5040，2008.
［SON 07a］SON S.F.，YETTER R.A.，YANG V.，“Introduction：nanoscale composite energetic materials”，Journal of Propulsion and Power，vol.23，no.4，pp.643－644，2007.
［SON 07b］Son S.F.et al.，“Combustion of nanoscale Al／MoO3 ther⁃mite in microchannels”，Journal of Propulsion and Power，vol.23，no.4，pp.715－721，2007.
［STA 10］STAMATIS D.et al.，“Aluminum burn rate modifiers based on reactive nanocomposite powders”，Propellants Explosives Pyrotechnics，vol.35，no.3，pp.260－267，2010.
［STA 11a］STAMATIS D.，DREIZIN E.L.，“Thermal initiation of con⁃solidated nanocomposite thermites”，Combustion and Flame，vol.158，no.8，pp.1631－1637，2011.
［STA 11b］STAMATIS D.，DREIZIN E.L.，HIGA K.，“Thermal initia⁃tion of Al－MoO3 nanocomposite materials prepared by different methods”，Journal of Propulsion and Power，vol.27，no.5，pp.1079－1087，2011.
［STA 11c］STAMATIS D.et al.，“Consolidation and mechanical pro⁃perties of reactive nanocomposite powders”，Powder Technology，vol.208，no.3，pp.637－642，2011.
［STA 11d］STALEY C.S.et al.，“Silicon－based bridge wire microchip initiators for bismuth oxide－aluminum nanothermite”，Journal of Micro⁃mechanics and Microengineering，vol.21，no.11，2011.
［STO 13］STOVER A.K.et al.，“An analysis of the microstructure and properties of cold－rolled Ni：Al laminate foils”，Journal of Materials Science，vol.48，no.17，pp.5917－5929，2013.
［STO 14］STOVER A.K.et al.，“Mechanical fabrication of reactive metal laminate powders”，Journal of Materials Science，vol.49，no.17，pp.5821－5830，2014.
［STR 93］STRUTT A.J.et al.，“Shock synthesis of nickel－alumin⁃ides”，Proceedings of the High－Pressure Science and Technology－1993，Pts 1 and 2，pp.1259－1262，1994.
［SUL 10］SULLIVAN K.T.et al.，“In situ microscopy of rapidly heated nano－Al and nano－Al／WO3 thermites”，Applied Physics Letters，vol.97，no.13，2010.
［SUL 12a］SULLIVAN K.T.，KUNTZ J.D.，GASH A.E.，“Electro⁃phoretic deposition and mechanistic studies of nano－Al／CuO thermites”，Journal of Applied Physics，vol.112，no.2，2012.
［SUL 12b］SULLIVAN K.T.et al.，“Electrophoretic deposition of binary energetic composites”，Combustion and Flame，vol.159，no.6，pp.2210－2218，2012.
［SUL 12c］SULLIVAN K.T.et al.，“Reactive sintering：an important component in the combustion of nanocomposite thermites”，Combustion and Flame，vol.159，no.1，pp.2－15，2012.
［SUL 13］SULLIVAN K.T.et al.，“Synthesis and reactivity of nano－Ag2O as an oxidizer for energetic systems yielding antimicrobial products”，Combustion and Flame，vol.160，no.2，pp.438－446，2013.
［SUN 06］SUN J.，PANTOYA M.L.，SIMON S.L.，“Dependence of size and size distribution on reactivity of aluminum nanoparticles in reactions with oxygen and MoO3”，Thermochimica Acta，vol.444，no.2，pp.117－127，2006.
［SUN 07］SUN J.，SIMON S.L.，“The melting behavior of aluminum nanoparticles”，Thermochimica Acta，vol.463，nos.1－2，pp.32－40，2007.
［SUN 09］SUHARD S.et al.，“When energetic materials，PDMSbased elastomers，and microelectronic processes work together：fabrication of a disposable microactuator”，Chemistry of Materials，vol.21，no.6，pp.1069－1076，2009.
［SUN 13］SUNDARAM D.S.et al.，“Effects of particle size and pres⁃sure on combustion of nano－aluminum particles and liquid water”，Combus⁃tion and Flame，vol.160，no.10，pp.2251－2259，2013.
［SWI 03］SWISTON A.J.，HUFNAGEL T.C.，WEIHS T.P.，“Joining bulk metallic glass using reactive multilayer foils”，Scripta Materialia，vol.48，no.12，pp.1575－1580，2003.
［TAN 08］TANAKA S.et al.，“Test of B／Ti multilayer reactive igniters for a micro solid rocket array thruster”，Sensors and Actuators A－Physical，vol.144，no.2，pp.361－366，2008.
［TAT 13］TATON G.et al.，“Micro－chip initiator realized by integra⁃ting Al／CuO multilayer nanothermite on polymeric membrane”，Journal of Mi⁃cromechanics and Microengineering，vol.23，no.10，2013.
［TEP 96］TEPPER F.，IVANOV G.V.，“Activated aluminium as a stored energy source for propellants”，Proceedings of the 4th International Symposium on Special Topics in Chemical Propulsion，Stockholm，Sweden，pp.636－644，27－28 May 1996.
［TEP 00］TEPPER F.，“Nanosize powders produced by electro－explo⁃sion of wire and their potential applications”，Powder Metallurgy，vol.43，no.4，pp.320－322，2000.
［TIL 01］TILLOTSON T.M.et al.，“Nanostructured energetic materials using sol－gel methodologies”，Journal of Non－Crystalline Solids，vol.285，nos.1－3，pp.338－345，2001.
［TRE 08］TRENKLE J.C.et al.，“Phase transformations during rapid heating of Al／Ni multilayer foils”，Applied Physics Letters，vol.93，no.8，2008.
［TRE 10］TRENKLE J.C.et al.，“Time－resolved x－ray microdiffrac⁃tion studies of phase transformations during rapidly propagating reactions in Al／Ni and Zr／Ni multilayer foils”，Journal of Applied Physics，vol.107，no.11，2010.
［TRU 05］TRUNOV M.A.et al.，“Effect of polymorphic phase trans⁃formations in Al2O3 film on oxidation kinetics of aluminum powders”，Combus⁃tion and Flame，vol.140，no.4，pp.310－318，2005.
［TRU 06］TRUNOV M.A.，SCHOENITZ M.，DREIZIN E.L.，“Effect of polymorphic phase transformations in alumina layer on ignition of aluminium particles”，Combustion Theory and Modelling，vol.10，no.4，pp.603－623，2006.
［UMB 06a］UMBRAJKAR S.M.，SCHOENITZ M.，DREIZIN E.L.，“Control of structural refinement and composition in Al－MoO3 nanocompos⁃ites prepared by arrested reactive milling”，Propellants Explosives Pyrotech⁃nics，vol.31，no.5，pp.382－389，2006.
［UMB 06b］UMBRAJKAR S.M.，SCHOENITZ M.，DREIZIN E.L.，“Exothermic reactions in Al－CuO nanocomposites”，Thermochimica Acta，vol.451，nos.1－2，pp.34－43，2006.
［UMB 08］UMBRAJKAR S.M.et al.，“Aluminum－rich Al－MoO3 nanocomposite powders prepared by arrested reactive milling”，Journal of Pro⁃pulsion and Power，vol.24，no.2，pp.192－198，2008.
［UME 07］UMEZAWA N.et al.，“1，3，5－Trinitro－1，3，5－triazine decomposition and chemisorption on Al（111）surface：first－principles mo⁃lecular dynamics study”，Journal of Chemical Physics，vol.126，no.23，p.234702，2007.
［VEC 94］VECCHIO K.S.，YU L.H.，MEYERS M.A.，“Shock syn⁃thesis of silicides I：Experimentation and microstructural evolution”，Acta Met⁃allurgica et Materialia，vol.42，no.3，pp.701－714，1994.
［WAL 07］WALTER K.C.，PESIRI D.R.，WILSON D.E.，“Manufac⁃turing and performance of nanometric Al／MoO3 energetic materials”，Journal of Propulsion and Power，vol.23，no.4，pp.645－650，2007.
［WAN 01a］WANG Q.et al.，“One－step synthesis of the nanometer particles of gamma－Fe2O3 by wire electrical explosion method”，Materials Research Bulletin，vol.36，nos.3－4，pp.503－509，2001.
［WAN 01b］WANG Q.et al.，“Preparation and characterization of nanocrystalline powders of Cu－Zn alloy by wire electrical explosion meth⁃od”，Materials Science and Engineering A－Structural Materials：Properties Microstructure and Processing，vol.307，nos.1－2，pp.190－194，2001.
［WAN 04a］WANG J.et al.，“Joining of stainless－steel specimens with nanostructured Al／Ni foils”，Journal of Applied Physics，vol.95，no.1，pp.248－256，2004.
［WAN 04b］WANG J.et al.，“Investigating the effect of applied pres⁃sure on reactive multilayer foil joining”，Acta Materialia，vol.52，no.18，pp.5265－5274，2004.
［WAN 11］WANG L.，LUSS D.，MARTIROSYAN K.S.，“The behav⁃ior of nanothermite reaction based on Bi2O3／Al”，Journal of Applied Physics，vol.110，no.7，2011.
［WAN 12］WANG S.X.et al.，“An investigation into the fabrication and combustion performance of porous silicon nanoenergetic array chips”，Nanotechnology，vol.23，no.43，pp.1－7，2012.
［WAN 13］WANG H.Y.et al.，“Electrospray formation of gelled nano－aluminum microspheres with superior reactivity”，ACS Applied Materials＆Interfaces，vol.5，no.15，pp.6797－6801，2013.
［WEI 05］WEISER V.et al.，“Influence of ALEX and other aluminum particles on burning behavior of gelled nitromethane propellants”，Theory and Practice of Energetic Materials，vol.6，pp.838－846，2005.
［WEI 09］WEISMILLER M.R.et al.，“Dependence of flame propaga⁃tion on pressure and pressurizing gas for an Al／CuO nanoscale thermite”，Pro⁃ceedings of the Combustion Institute，vol.32，pp.1895－1903，2009.
［WEI 11a］WEINGARTEN N.S.，RICE B.M.，“A molecular dynamics study of the role of relative melting temperatures in reactive Ni／Al nanolami⁃nates”，Journal of Physics－Condensed Matter，vol.23，no.27，2011.
［WEI 11b］WEISMILLER M.R.et al.，“Effects of fuel and oxidizer particle dimensions on the propagation of aluminum containing thermites，”Proceedings of the Combustion Institute，vol.33，pp.1989－1996，2011.
［WEI 13a］WEIR C.et al.，“Electrostatic discharge sensitivity and electrical conductivity of composite energetic materials”，Journal of Electro⁃statics，vol.71，no.1，pp.77－83，2013.
［WEI 13b］WEIR C.，Pantoya M.L.，Daniels M.A.，“The role of alu⁃minum particle size in electrostatic ignition sensitivity of composite energetic materials”，Combustion and Flame，vol.160，no.10，pp.2279－2281，2013.
［WRO 67］WRONSKI C.R.M.，“The size dependence of the melting point of small particles of tin”，British Journal of Applied Physics，vol.18，no.12，p.1731，1967.
［WU 10］WU C.，LEE D.，ZACHARIAH M.R.，“Aerosol－based selfassembly of nanoparticles into solid or hollow mesospheres”，Langmuir，vol.26，no.6，pp.4327－4330，2010.
［YAN 02］YANG Y.，HAMBIR S.A.，DLOTT D.D.，“Ultrafast vibra⁃tional spectroscopy imaging of nanoshock planar propagation”，Shock Waves，vol.12，no.2，pp.129－136，2002.
［YAN 03］YANG Y.Q.et al.，“Fast spectroscopy of laser－initiated nanoenergetic materials”，Journal of Physical Chemistry B，vol.107，no.19，pp.4485－4493，2003.
［YAN 12］YANG Y.，XU D.G.，ZHANG K.L.，“Effect of nanostruc⁃tures on the exothermic reaction and ignition of Al／CuOx based energetic ma⁃terials”，Journal of Materials Science，vol.47，no.3，pp.1296－1305，2012.
［YAN 14］YANG C.et al.，“Fabrication and performance characteriza⁃tion of Al／Ni multilayer energetic films”，Applied Physics A：Materials Science and Processing，vol.114，no.2，pp.459－464，2014.
［ZHA 07a］ZHANG K.，FAN J.－H.，HUANG Y.－H.et al.，“Con⁃tent and activity analysis of aluminum powder in nano－aluminum／PS micro⁃capsules”，Hanneng Cailiao／Chinese Journal of Energetic Materials，vol.15，no.5，pp.482－484，2007.
［ZHA 07b］ZHAO S.J.，GERMANN T.C.，STRACHAN A.，“Melting and alloying of Ni／Al nanolaminates induced by shock loading：a molecular dynamics simulation study，”Physical Review B，vol.76，no.10，2007.
［ZHA 07c］ZHANG K.et al.，“Development of a nano－Al／CuO based energetic material on silicon substrate”，Applied Physics Letters，vol.91，no.11，2007.
［ZHA 08］ZHANG K.L.et al.，“A nano initiator realized by integra⁃ting Al／CuO－based nanoenergetic materials with a Au／Pt／Cr microheater”，Journal of Microelectromechanical Systems，vol.17，no.4，pp.832－836，2008.
［ZHA 13］ZHANG F.et al.，“In－situ preparation of a porous copper based nano－energetic composite and its electrical ignition properties”，Pro⁃pellants Explosives Pyrotechnics，vol.38，no.1，pp.41－47，2013.
［ZHO 10］ZHOU L.et al.，“Time－resolved mass spectrometry of the exothermic reaction between nanoaluminum and metal oxides：the role of oxy⁃gen release”，Journal of Physical Chemistry C，vol.114，no.33，pp.14269－14275，2010.
［ZHO 11］ZHOU X.et al.，“Influence of Al／CuO reactive multilayer films additives on exploding foil initiator”，Journal of Applied Physics，vol.110，no.9，2011.
［ZHU 03］ZHUKOVSKII Y.F.，JACOBS P.W.M.，CAUSA M.，“On the mechanism of the interaction between oxygen and close－packed singlecrystal aluminum surfaces”，Journal of Physics and Chemistry of Solids，vol.64，no.8，pp.1317－1331，2003.
［ZHU 11］ZHU P.et al.，“Energetic igniters realized by integrating Al／CuO reactive multilayer films with Cr films”，Journal of Applied Physics，vol.110，no.7，2011.
［ZHU 13］ZHU P.et al.，“Characterization of Al／CuO nanoenergetic multilayer films integrated with semiconductor bridge for initiator applica⁃tions”，Journal of Applied Physics，vol.113，no.18，2013.
免责声明：以上内容源自网络，版权归原作者所有，如有侵犯您的原创版权请告知，我们将尽快删除相关内容。
